Search Products
Hot stamping samples
you are here: Home >> Hot stamping samples

Hot Stamping is a dry printing method in which a heated die and foil are used to apply graphics to a surface. This is one method of security printing.

Hot stamping is a straight forward process;1) A die is mounted and heated, 2) Foil is positioned above the material to be imprinted, 3) A combination of heat, dwell time, pressure and stripping time control the quality of the stamp. Foil stamping is environmentally friendly due to it being a dry process. It does not use solvents or inks and does not create any harmful vapors.

A successful hot stamping job is directly related to the quality of the original artwork. In order to insure the highest quality reproduction of an imprint, the original artwork should be “camera-ready.” The better the artwork at the beginning, the better the imprint reproduction result. The key to a successful hot stamping job is three-fold; the first is creating a fixture to support the part firmly under the decorating area. Second, the fixture must also position the part for repeatability of the graphic location. And third, the fixture must allow the operator to easily load and unload the part from the fixture.

Product: AHT-200
/Hot stamping samples(AHT-200 Samples1)

Hot stamping samples(AHT-200 Samples1)

Product: AHT-200
/Hot stamping samples(AHT-200 Samples2)

Hot stamping samples(AHT-200 Samples2)

Product: AGP-230
/AGP-230 Samples1

AGP-230 Samples1

Product: AGP-230
/AGP-230 Samples2

AGP-230 Samples2

Product: CRGP-350
/CRGP-350Samples1

CRGP-350Samples1

Product: CRGP-350
/CRGP-350Samples3

CRGP-350Samples3

Product: GP-180
/GP-180Samples1

GP-180Samples1

Product: GP-180
/GP-180 Samples2

GP-180 Samples2

Product: GP-210
/GP210 Samples1

GP210 Samples1

Product: GP-210
/GP210Samples2

GP210Samples2

Product: GP-300
/GP-300Samples1

GP-300Samples1

Product: GP-300
/GP-300 Samples2

GP-300 Samples2

 
FirstPreviousNextEnd
Send Message
Close